HP StorageWorks Command View SDM Installation and User Guide (T1086-96023, February 2005)

Command Line User Interface 119
Command Line User Interface
armdsp
Description
The armdsp command is used to display status and configuration information
for the array identified by
<array-id>. Logical configuration, physical
configuration, and current status can all be displayed. A list of the array IDs of
all the arrays connected to the host can also be displayed.
Syntax
armdsp {-a [-r] | -c [<FruLocation>] | -d [<FruLocation>] | -e [<FruLocation>] | -f |
-L [LUN] [-r] | -p [<FruLocation>] | -ps | -s | -t } <array-id>
armdsp { -i [
<HostName>] } [ -b | -v ]
armdsp { -vfp [<FruLocation>] }
<array-id>
armdsp <array-id>
armdsp -?
Options
None Display general information about the array. This includes product and
vendor information, array state, and capacity usage.
-a [-r] Display the information presented by all other options. This is a quick way
of displaying all configuration and status information about the array. If
the -r option is included, the allocated space for all the LUNs are
displayed. This command will also print the version of Command View.
-c [<FRULocation>] Display controller information.
If <FRULocation> is not given, display detailed information for each
controller.
If <FRULocation> is given and specifies an enclosure (e.g., JA1), display
detailed information for each controller.
If <FRULocation> is given and specifies a controller (e.g., JA1/C1),
display detailed information only for that controller.