HP StorageWorks Storage System Scripting Utility reference (September 2005)

Syntax
REDISCOVER
REFRESH
Use the REFRESH command to refresh an array. This command does not take parameters and the array
needs to be selected before you can use this com m and.
Syntax
REFRESH
RESTART
Use the RESTART comma nd to restart a controller shown by the LS CONTROLLER command.
Syntax
RESTART <controller_name>
Switches
ThefollowingswitchesareavailablefortheRESTARTcommand:
ALL_PEERS
Restarts all peer controllers (both controllers) on this array.
NOALL_PEERS
Default. Restarts only the specified controller.
Examples
RESTART “\Hardware\Rack 1\Enclosure 7\Controller B” ALL_PEERS
This example restarts Controller B, and its peer controller.
RESTART “\Ha
rdware\Rack 1\Enclosure 7\Controller A” NOALL_PEERS
This example restarts Controller A but not its peer controller.
SELECT
Use the SELECT commands to select a m anag er or an array. After you select an array, the prompt
changes to reflect the selected array.
SELECT MANA
GER
Use the SELECT MANAGER command to direct the command prompt to a selected HP Command View
EVA or EVA server. All configuration commands run on the selected HP Command View EVA or EVA
Command View instance and affect its array's configuration. The <manager_name> can be a server,
managemen
t server name, or an IP address. Unless the SAN administrator has changed the password,
the defaul
t password is “administrator” and the default user is “administrator.” The user name and
password for the manager are validated in the background on every command.
56
Utility command reference