HP StorageWorks Enterprise Scalable NAS Products and Solutions Compatibility Matrix v1.4.0 (September 2009)
Firmware Supported in SWD E NAS 3.7.0 Firmware Supported in SWD E NAS 3.5.1
2xxx series 2.4.1c-2.4.1.h, 2.6.0a-2.6.0f, 2.6.0j 2.4.1c-2.4.1.h, 2.6.0a-2.6.0f, 2.6.0j
E200 5.1.0d 5.1.0d
3xxx series 3.02c, 3.02h, 3.02q, 3.1.2, 3.1.3, 3.2.0, 3.2.1a 3.02c, 3.02h, 3.02q, 3.1.2, 3.1.3, 3.2.0, 3.2.1a
3x50, 4100
b
4.4.0d 4.4.0d
12000 Director 4.02c, 4.02d, 4.2.2, 4.40e 4.02c, 4.02d, 4.2.2, 4.40e
Embedded in HP MSA 1000 3.1.1_rc2, 3.1.2 3.1.1_rc2, 3.1.2
4024, 48000 6.0.0b, 6.1.0h, 6.2.0e, 6.2.0g 6.0.0b, 6.1.0h, 6.2.0e
MDS 9000 series
c
1.3(4), 2.1 1.3(4), 2.1
E
MC M
D
S 9000 Se
ri
es
1
.3(
4
);
2
.
11
.3(
4
);
2
.
1
Fabric-Based Fencing Support on Linux
Brocade and Brocade OEM Models
Cisco
StorageWorks Enterprise NAS Release
FC Switch Vendor and Model
Enterprise NAS Products and Solutions
Compatibility Matrix
Contents
EMC MDS 9000 Series
1.3(4); 2.1
1.3(4); 2.1
MDS 9124, 9509 3.1(1), 3.2.1a 3.1(1)
Sphereon 3000 series 5.01.00, 6.00.00, 6.02.00, 8.01, 9.00.00 5.01.00, 6.00.00, 6.02.00, 8.01, 9.00.00
Sphereon 4000 series 5.01.00, 6.00.00ª, 6.02.00ª, 8.01, 9.01.00 5.01.00, 6.00.00ª, 6.02.00ª, 8.01, 9.01.00
Sphereon 4300, 4500 5.01.00, 8.01, 9.01.00 5.01.00, 8.01, 9.01.00
Intrepid 6000 Director series 5.01.00, 6.00.00ª, 6.01.00ª, 6.02.00ª, 8.01, 9.01.00 5.01.00, 6.00.00ª, 6.01.00ª, 6.02.00ª, 8.01, 9.01.00
SANbox2 series 4.0.0.11 (or 2.0.0.15 for IBM BladeCenter) 4.0.0.11 (or 2.0.0.15 for IBM BladeCenter)
SANbox 5200 5.0.0.17 5.0.0.17
SANbox 5600 5.0.1.10.0 5.0.1.10.0
NOTES:
d. The 7.x and the 8.00.xx firmware is not supported for McDATA and McDATA OEM switches.
b. 4.4.0b firmware version for Brocade OEM Models 3x50 and 4100 is not supported.
c. CISCO MDS9020 switch is not supported for fabric fencing.
• Due to non-conformance with the FE-MIB, with each snmpget these releases generate a snmpget NULL response for each empty switch port, creating exceptionally large, redundant logs.
McDATA and McDATA OEM
d
Qlogic
a. The following support limitations apply to McDATA 4300, 4500, and 6140 FibreChannel switches using the 6.0 firmware:
• When running mxconfig, initial configuration of the SAN switch can take several minutes.
• Long latency SNMP response causes nodes to exhibit unusual slowness in joining a cluster.
Enterprise NAS Products and Solutions
Compatibility Matrix
Contents
5