4.1.0 HP Polyserve Software Installation Guide (T5392-96066, October 2010)

mx config description <description>
The matrix name or description appears on the title bar of the PolyServe Man-
agement Console. The name or description can contain up to 80 characters.
mx config webfencing --ruser <user name> --vendor
<vendor_name> --mixedvendor yes|no --hostname <name>|--host-
suffix <suffix> | --ipdelta <delta> [--type reset|shutdown]
[--bladeslot <slot>] [--sharedlogin yes|no] [--rpassword
<password>]
Configure web management-based fencing, in which Matrix Server uses remote
management hardware on the server to remove its access to PSFS filesystems.
iSCSI storage must use this fencing method. When configuring web management-
based fencing, you will need to specify how Matrix Server should identify the
Remote Management Controller associated with each server. Use one of these
methods:
--hostname <host name>
Specify the hostname for the Remote Management Controller associated
with this server. You will need to use this method if your Remote Management
Controllers are from different vendors. This method must also be used for
IBM BladeCenter servers.
--hostsuffix <host suffix>
Specify the common suffix to append to each server name to determine the
associated Remote Management Controller name. For example, if your
server names are server1 and server2 and their Remote Management Con-
trollers are server1-iLO and server2-iLO, enter -iLO as the suffix.
--ipdelta <ip delta>
Specify the delta to add to each server’s IP address to determine the IP ad-
dresses of the associated Remote Management Controllers. For example, if
your servers are 1.255.200.12 and 1.255.200.15 and their Remote
Management Controllers are 1.255.201.112 and 1.255.201.115, enter
0.0.1.100 as the delta.
--vendor <vendor>
The vendor for your remote management controller (dell, hp, ibm, or ipmi).
[--bladeslot <slot>]
For IBM Blade Center only, the blade slot.
--mixedvendor yes|no
Whether the vendor and type settings apply to all servers.
[--rpassword <password>]
The password for the Remote Management Controller.
Configure the matrix from the command line50