4.1.0 HP PolyServe Software for Microsoft SQL Server administration guide (T5392-96074, October 2010)

to fail over the Virtual SSAS to a backup node. If a backup node is not available or
if the Policy configuration of the monitor is NOFAILOVER, the Virtual SSAS will remain
active on the original node and the status reported for the monitor will be “UP Active
(disabled).”
To disable a Virtual SSAS instance monitor, select it on the PolyServe Management
Console, right-click, and select Disable. To reenable the monitor, select it on the
Management Console, right-click, and select Enable.
Use the following commands to enable or disable the monitor from the command
line:
mx vssasinstance enable <vssas\instance> <netif>
mx vssasinstance disable <vssas\instance> <netif>
Clear monitor errors
When a monitor error occurs, the monitor stops operating until the error is cleared.
Check the Applications tab for monitor errors (a red E is displayed in the server
column associated with the monitor). To clear an error, select the monitor, right-click,
and select Clear Last Error.
To clear an error from the command line, use this command:
mx vssasinstance clear <vssas\instance> <netif> ...
Delete a Virtual SSAS instance
To remove a Virtual SSAS instance, select that instance on the Management Console,
right-click, and select Delete. During the delete, HP PolyServe Software removes the
instance from the matrix and performs an operation on the instance to return it to its
original state. However, if this operation fails, we recommend that you reinstall the
instance.
To delete a Virtual SSAS instance from the command line, use this command:
mx vssasinstance delete [––force yes|no] <vssas\instance>
The --force yes option causes the deletion to take place even when
devirtualization fails.
Revirtualize a Virtual SSAS instance
Occasionally you may need to delete a Virtual SSAS Instance temporarily and restore
the instance to its original state. When you recreate the Virtual SSAS Instance with
the Add IAnalysis Services Service dialog, a popup message states that the data files
HP PolyServe Software for Microsoft SQL Server 4.1 administration guide 113