4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

DescriptionCommand
Enable a Matrix File Shareenable
Display the status of a Matrix File Sharestatus
Update an existing Matrix File Shareupdate
add—Add a Matrix File Share
mx mfs add --path <path> --servers ALL_SERVERS|<server1>,
<server2>,... [arguments] <mfs_name>
--servers specifies the servers on which the Matrix File Share should be configured.
<mfs_name> is the name for the Matrix File Share. <path> is the location of the
Matrix File Share (such as y:\myshared). This is typically the drive letter or path
assigned to the PSFS filesystem that will be accessed via this share. Following is an
example:
mx mfs add --path y:\myshared --servers ALL_SERVERS mymfs1
The options are:
[--timeout <seconds>]
The maximum amount of time to wait for a probe of the file share to complete.
The default value is five seconds.
[--frequency <seconds>]
The frequency is the interval of time, in seconds, at which the monitor probes the
file share. The default value is 10 seconds.
[--users_limit ALL_USERS|<limit>]
The number of users that will be allowed to access the Matrix File Share simul-
taneously. The maximum value is the system maximum, which is limited by the
available memory.
[--comments <comment>]
A description of the file share.
[--access_based_enum enabled|disabled]
Enables or disables the Access-based Enumeration feature. This feature allows
users to see only the files and folders to which they have access on a file share.
[--application <application_name>]
The application that will be associated with this file share.
[--share_subdirs]
HP PolyServe Software 4.1 command reference guide 97