4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

mx fs queryassignments <ps device> | ALL_SERVERS | <server> ...
recreate—Reformat a PSFS filesystem
mx fs recreate [options] <filesystem>
showcreateopt—Display information about storage devices
mx fs showcreateopt
status—Display status information
mx fs status [--verbose] [--standard|--snapshots]
This command lists the status of each filesystem. The --verbose option displays the
FS type (always PSFS), the size of the filesystem in KB, and the UUID of the parent
disk. The --standard argument shows only standard filesystems; the --snapshots
argument shows only snapshots.
unassign—Unassign a drive letter or path
mx fs unassign <ps device> ALL_SERVERS | <server> ...
mx matrix – cluster commands
Use the following commands to perform cluster-wide operations.
DescriptionCommand
Destroy the clusterdestroy
Dump or restore cluster configuration informationdump
Insert an event message into the event loglog
Display status informationstatus
destroy—Destroy the cluster
mx matrix destroy
This command attempts to remove your cluster configuration. The command may fail,
based on the resources in use throughout the cluster.
The output from matrix dump, when run prior to matrix destroy, can be useful
in restoring a cluster configuration after it has been destroyed; however, you may
need to perform the reconfiguration manually.
HP PolyServe Software 4.1 command reference guide 95