4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

DescriptionCommand
Dump filesystem configuration to stdoutdump
Display drive letters in use on a servergetdriveletters
Display drive letter or path assignments for a filesystemqueryassignments
Reformat a filesystemrecreate
Display information about storage devicesshowcreateopt
Display status informationstatus
Unassign a drive letter or pathunassign
assign—Assign a drive letter or path to a filesystem
mx fs assignpath --path <path or driveletter>
[--createdir] <ps device> ALL_SERVERS | <server> ...
If a mount path is specified, the --createdir option can be used to create the
mount path if it does not already exist on each server.
create—Create a PSFS filesystem
mx fs create [optional-arguments] <storageDevice>
A storage device is a basic or dynamic volume. To locate an available volume, use
the fs showcreateopt command.
The optional arguments are:
[--label <label>]
The label for the filesystem. It can contain up to 32 characters.
[--blocksize 4K|8K]
The block size used by the filesystem. you will be using the filesystem with HP
PolyServe Software for Microsoft SQL Server, the block size must be 8 KB.
[--reuse]
Reuse a psd device. If you will be creating a filesystem on a psd device that is
associated with an unimported dynamic volume, the--reuse option must be
used to tell the command to reuse the device. Without this option, the attempt to
create the filesystem will fail because the device contains a volume signature.
Be sure that you do not need the unimported dynamic volume before doing this.
[--quotas]
HP PolyServe Software 4.1 command reference guide 93