4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

[--showBorder]
Include a table border in the output.
showtype—show available snapshot methods
mx config snapshot showtype
test—test an existing snapshot method configuration
mx config snapshot test --method <type> --hostname <IP_address>
| --controllerA <hostname|IP_address>
The options are:
--method <type>
The supported types are hpeva and engenio.
--hostname <hostname>|--controllerA <hostname|IP_address>
For hpeva, use the --hostname option to specify the hostname for the man-
agement appliance. For engenio, use the --controllerA option to specify
the hostname or IP address for controllerA on the storage array.
mx device – device monitor commands
Use the following commands to configure device monitors or to display their status.
DescriptionCommand
Add a device monitoradd
Clear device monitor error condition and alertclear
Remove a device monitordelete
Disable a device monitordisable
Dump the device monitor configurationdump
Enable a device monitorenable
Set the Global Event Delayglobalsettings
Show the status of device monitorsstatus
Modify the configuration of a device monitorupdate
add—Add a device monitor
mx commands80