4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

--hostname <hostname>
The hostname for the management appliance.
--username <username>
The user name required to access the management appliance.
--passwd <password>
The password required to access the management appliance.
For engenio, specify the following:
--controllerA <hostname or IP address>
The hostname or IP address for controllerA.
--controllerB <hostname or IP address>
The hostname or IP address for controllerB.
--passwd <password>
The password for the storage array controller.
The mx config snapshot showtype command also lists the options available
for your snapshot method.
delete—delete a snapshot method configuration
mx config snapshot delete --method <type> --hostname <hostname>
|--controllerA <IP_address>
The options are:
--method <type>
The supported types are hpeva and engenio.
--hostname <hostname>|--controllerA <IP_address>
For hpeva, use the --hostname option to specify the hostname for the man-
agement appliance. For engenio, use the --controllerA option to specify
the hostname or IP address for controllerA on the storage array.
list—list all existing snapshot method configurations
mx config snapshot list [--noHeaders] [--csv] [--showBorder]
The options are:
[--noHeaders]
Do not display column headers in the output.
[--csv]
Display the output in comma-separated value format.
HP PolyServe Software 4.1 command reference guide 79