4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

A cluster can use either one or three membership partitions. <uuid1/partno> is
the uuid and partition number of the first membership partition; <uuid2/partno>
is the second membership partition, and <uuid3/partno> is the third membership
partition. The options are:
[--recreate]
Allow existing membership partition information to be destroyed.
[--force]
Force membership partition replacements to occur even if the partitions to be
replaced cannot be invalidated.
[--reuse]
Allow disks that contain existing volume information to be reused. (The existing
data is destroyed.)
mx config snapshot – snapshot method commands
Use the following commands to manage snapshot methods.
DescriptionCommand
Add a new snapshot method configurationadd
Delete a snapshot method configurationdelete
Dump the snapshot configurationdump
List all existing snapshot method configurationslist
Show available snapshot methodsshowtype
Test an existing snapshot method configurationtest
add—add a new snapshot method configuration
mx config snapshot add --method <type> [--options <method options>]
The options are:
--method <type>
The supported types are hpeva and engenio.
[--options <method options>]
For hpeva, specify the following:
mx commands78