4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

(the “used” size). The “used” size should be the same for all three membership
partitions, but the physical size can vary and will always be the same or larger than
the “used” size.
list_avail_disks—List disks that can be used for membership partitions
mx config mp list_avail_disks [--noHeaders] [--csv] [--showborder]
The options are:
[--noHeaders]
Do not display column headers in the output.
[--csv]
Display the output in comma-separated value format.
[--showborder]
Display borders in the output.
list_avail_partitions—List partitions that can be used for membership partitions
mx config mp list_avail_partitions [--noHeaders] [--csv] [--showborder]
<disk uuid>
<disk uuid> is the disk that will be checked for available partitions. The options
are:
[--noHeaders]
Do not display column headers in the output.
[--csv]
Display the output in comma-separated value format.
[--showborder]
Display borders in the output.
repair—Repair a membership partition
mx config mp repair [--reuse] <uuid>
This command can be used to resilver a corrupt membership partition. <uuid> is
the disk UID of the membership partition to be repaired. The --reuse option allows
disks that contain existing volume information to be reused. (The existing data is
destroyed.) The --reuse option is available only when the cluster is offline.
set—Add or replace membership partitions
mx config mp set [--recreate] [--force] [--reuse] <uuid1/partno>
[<uuid2/partno> <uuid3/partno>]
HP PolyServe Software 4.1 command reference guide 77