4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

[--mps]
The current membership partitions.
[--protocol]
The current administrative traffic protocol (either Multicast or Unicast). Multicast
is the default.
[--santype]
The current storage type (either FibreChannel or iSCSI).
[--servers]
The servers currently in the cluster.
[--snapshots]
The snapshots currently in the cluster.
[--status]
The current status of the cluster (STARTING, RUNNING, STOPPING, or STOPPED).
[--switches]
The FibreChannel switches currently configured in the cluster.
The following options apply only when web-based fencing is used:
[--hostname]
The hostname for the Remote Management Controller.
[--hostsuffix]
The Remote Management Controller ID hostname suffix.
[--ipdelta]
The Remote Management Controller IP delta.
[--mixedvendor]
Whether the vendor and type settings apply to all servers.
[--ruser]
The login name for the Remote Management Controller.
[--sharedlogin]
Whether the login for the Remote Management Controller is shared by all servers.
[--type]
The fencing action (reset or shutdown).
[--vendor <vendor>]
The remote management controller vendor (dell, hp, ibm, or ipmi).
protocol—Set the administrative traffic protocol
HP PolyServe Software 4.1 command reference guide 73