4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

mx config fcswitch [--community <string>] <switch> ...
This command can be used only when the cluster is offline. If you set FibreChannel
as the fencing method, you must also configure the FibreChannel switches connected
to the cluster. This step is optional for web-based fencing.
The default SNMP community string for Matrix Server is private. If you want to use
a custom community string, use the --community option to enter the appropriate
value. The SNMP community string must be set to the same value on Matrix Server
and on the SAN switches.
import—Import the cluster configuration
mx config import <server>
This command can be used when the cluster is either online or offline.
license—Set the cluster license file
mx config license <file name>
The filename specifies the location of the Matrix Server license file. This command
can be used when the cluster is either online or offline.
list—Get the cluster configuration
mx config list [--bladeslot] [--fence_module] [--description]
[--hostname] [--hostsuffix] [--ipdelta] [--license] [--mixedvendor]
[--os] [--mps] [--protocol] [--santype] [--servers] [--sharedlogin]
[--snapshots] [--status] [--switches] [--type] [--ruser] [--vendor]
This command can be used when the cluster is either online or offline. With no
options, the command displays the entire cluster configuration. You can use the
options to limit the output to certain components. The options return the following
information:
[--bladeslot]
For the IBM Blade Center only, the blade slot.
[--fence_module]
The currently configured fencing module (FibreChannel or web-based).
[--description]
The description assigned to this cluster.
[--license]
The current license.
[--os]
The name of the operating system.
mx commands72