4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

# sandiskinfo --subdevices
Subdevice: 20:00:00:04:cf:13:38:18::0/2 Size: 1950M psd1p2
Subdevice: 20:00:00:04:cf:13:38:18::0/7 Size: 490M psd1p7
Subdevice: 20:00:00:04:cf:13:38:18::0/8 Size: 490M psd1p8
Subdevice: 20:00:00:04:cf:13:38:18::0/9 Size: 490M psd1p9
Subdevice: 20:00:00:04:cf:13:38:18::0/10 Size: 490M psd1p10
Subdevice: 20:00:00:04:cf:13:38:18::0/11 Size: 490M psd1p11
Subdevice: 20:00:00:04:cf:13:38:18::0/12 Size: 490M psd1p12
Subdevice: 20:00:00:04:cf:13:38:18::0/13 Size: 490M psd1p13
Subdevice: 20:00:00:04:cf:13:38:18::0/14 Size: 490M psd1p14
Show dynamic volumes
The --dynvolumes option lists all dynamic volumes.
# sandiskinfo --dynvolumes
Dynamic Volume: psv1 Size: 2439M Stripe=Unstriped
Dynamic Volume: psv2 Size: 490M Stripe=32K
Dynamic Volume: psv3 Size: 490M Stripe=8K
Show properties for dynamic volumes
The --dynvol_properties [volname] option lists detailed properties for the
specified dynamic volumes. volname is the psv name, such as psv2. If this option
is omitted, the properties for all dynamic volumes are displayed.
# sandiskinfo --dynvol_properties
Dynamic Volume: psv1 Size: 2439M Stripe=Unstriped
Subdevice: 20:00:00:04:cf:13:38:18::0/5 Size: 490M psd1p5
Subdevice: 20:00:00:04:cf:13:38:18::0/2 Size: 1950M psd1p2
Dynamic Volume: psv2 Size: 490M Stripe=32K/optimal
Subdevice: 20:00:00:04:cf:13:38:18::0/7 Size: 490M psd1p7
Dynamic Volume: psv3 Size: 490M Stripe=8K/optimal
Subdevice: 20:00:00:04:cf:13:38:18::0/10 Size: 490M psd1p10
Display unimported dynamic volumes
The following options can be used to display information about unimported dynamic
volumes:
--unimported-volumes
Lists dynamic volumes that are currently unimported.
--importable-volumes
Lists unimported dynamic volumes that can be imported into the cluster.
--unimportable-volumes
HP PolyServe Software 4.1 command reference guide 57