4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

psfsunpack.exe – unpack a PSFS filesystem image
Synopsis
tools\psfsunpack
Description
This command should be used only under the direction of HP personnel.
psvctl.exe – manage dynamic volumes
Synopsis
tools\psvctl
Description
This command should be used only under the direction of HP personnel.
registry.exe – dump registry contents
Synopsis
tools\registry
Description
This command is used internally by the mxcollect utility and should not be run
directly.
sandiskinfo.exe – show SAN disk/LUN information
Synopsis
bin\sandiskinfo [-i|-u|-v|-f] [-alr] [-U] [-q] [--subdevices]
[--dynvolumes] [--dynvol_properties [volname]]
Description
The sandiskinfo command can display information for both imported and
unimported SAN disks (or LUNs) and also for dynamic volumes. Under normal
operations, the sandiskinfo output should be the same on all servers in the cluster.
HP PolyServe Software 4.1 command reference guide 53