4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

nologhardlimit
File operations that result in exceeding a user’s hard limit are not logged.
logsoftlimit
File operations that result in exceeding a user’s soft limit are logged in the system
event log.
nologsoftlimit
File operations that result in exceeding a user’s soft limit are not logged.
enforcehardlimit
File operations that will result in exceeding a user’s hard limit are denied.
noenforcehardlimit
File operations that will result in exceeding a user’s hard limit are allowed.
sparse-fullcost
Quota accounting for sparse files reflects the virtual size of the files.
sparse-realcost
Quota accounting for sparse files reflects the actual allocation of filesystem space
to the files.
psfsinfo.exe – report filesystem information
Synopsis
tools\psfsinfo [feature <feature>] [--version] [--verbose | –v] <device> ...
Description
The psfsinfo command reports information about the filesystem. With no options,
the information includes the size of the filesystem, the block size, the version of the
filesystem, and a list of features that are enabled.
The device can be specified in several ways:
• By the drive letter, such as X:
• By the mount point (junction), such as C:\san\vol2
• By the psd or psv name, such as psd2p2 or psv3
The options are:
--feature <feature>
Report whether the specified feature is enabled in the filesystem indicated by
<device>. The command can test for the following features:
FZBM – the Full Zone Bit Map feature
HP PolyServe Software 4.1 command reference guide 47