4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

mxconsole.exe – start the PolyServe Management
Console
Synopsis
bin\mxconsole
Description
The mxconsole command starts the PolyServe Management Console, which is used
to configure and monitor the matrix. The Management Console can be run from
either a matrix server or a local machine outside the matrix. (See the HP PolyServe
Matrix Server administration guide for information about using the Management
Console.)
mxgenpass.exe – create encrypted passwords
Synopsis
bin\mxgenpass
Description
This command can be used to create encrypted passwords for use in the .matrixrc
file. For an example of using this command, see Encrypted passwords in the .matrixrc
file, page 64.
mxsancheck.exe – check server’s SAN access
Synopsis
bin\mxsancheck
Description
The mxsancheck command determines whether a server has SAN access and is
ready to mount filesystems. The command is intended to be used in scripts and returns
0 on success and 1 on failure.
Cluster commands32