4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

mxcheck.exe – verify cluster requirements
Synopsis
bin\mxcheck
Description
The mxcheck utility verifies that a server meets the configuration requirements for
Matrix Server. It is run automatically each time Matrix Server is started. You can also
run mxcheck manually.
The utility performs the following checks on the server:
• System check: hardware, operating system version, service pack version, available
physical memory.
• Network check: IP network and interface assignments, forward and reverse
hostname lookup, and Excluded interfaces.
• Storage check: Host Bus Adapters, drivers, and settings.
• Miscellaneous check: other checks such as the non-paged pool setting.
Output from the utility appears on the screen and is also written to the Application
Log section of the Event Viewer.
mxcollect.exe – collect configuration information
Synopsis
tools\mxcollect
Description
This utility collects configuration information and log files from the matrix. The utility
is typically run under the direction of HP Support.
You will need to run the mxcollect utility on each node. The utility is located in
the %ProgramFiles%\PolyServe\MatrixServer\tools folder. Go to this
location and double-click the file mxcollect.exe. You will then see a command
window that says “Collecting files.” The information collected from that node is written
to the file mxcollect_machinename_yyyymmdd_hhmmss_default.zip. This
file is placed in the following folder:
%SystemDrive%\Program Files\PolyServe\MatrixServer\conf\
mxcollect
HP PolyServe Software 4.1 command reference guide 31