4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

Description
This command can be used to display events from the cluster event log on the local
server.
The options are:
-b
Display the output in XML format.
-c
Do not display column headings in the output.
-h [<count-limit>]
Display the specified number of events, starting at the beginning of the log. If
<count-limit> is omitted, all matching events will be displayed. (If -t is also
specified, it will not have any effect.)
-h --count
Display the number of matching events but not the events themselves.
-t [<initial count>]
Tail mode (this is the default). Display the output starting with the most recent
event. When <initial count> is used, that number of matching recent events
will be displayed and the utility will then wait for new events to display. As long
as the connection remains open, any new messages will be displayed as they
are logged.
<select columns>
By default, the output includes the following event columns: eventtime, location,
user, eventid, source, message. You can use this parameter to specify the names
of particular columns that you want to view. A column name can be followed
by a positive integer (such as source12) to indicate the number of characters to
be used for that column. If a width of zero is specified, the column will be sized
appropriately for the data. The column names are:
The category assigned to the event. Categories group related
events (for example, SAN and Server are categories).
category
The ID assigned to a category.categoryid
The ID assigned to the event.eventid
The time at which the event occurred on the generating node.eventtime
The IP address of the node where the event occurred.location
HP PolyServe Software 4.1 command reference guide 19