4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

mx vssas update [--policy autofailback|nofailback] [--application
<application>] [––force yes|no] <ip> <name> << network_interface> ...>
The options are the same as vssas add.
mx vssasinstance – Virtual SSAS Instance commands
Use the following commands to manage Virtual SSAS instances.
DescriptionCommand
Add a new Virtual SSAS Instanceadd
Clear a monitor eventclear
Remove a Virtual SSAS Instancedelete
Disable a Virtual SSAS Instancedisable
Dump the Virtual SSAS Instance configurationdump
Enable a Virtual SSAS Instanceenable
Show the status of a Virtual SSAS Instancestatus
Modify an existing Virtual SSAS Instanceupdate
add—Add a SSAS instance to a Virtual SSAS
The arguments are:
--vpath <path>
The full path that will be used for the data files and directories for this virtual
SSAS instance. This location will store the SSAS Data Root that was created
when the SSAS instance was installed.
[--timeout <seconds>]
The maximum amount of time to wait for a probe to complete. The default is 15
seconds.
[--frequency <seconds>]
The interval of time, in seconds, at which the monitor runs the probe. The default
is 20 seconds.
[--restarts <number of restarts>]
HP PolyServe Software 4.1 command reference guide 137