4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

mx vssas – Virtual SSAS commands
Use the following commands to configure a Virtual SSAS or to display status.
DescriptionCommand
add a new Virtual SSASadd
delete a Virtual SSASdelete
disable a Virtual SSASdisable
dump the Virtual SSAS configurationdump
enable a Virtual SSASenable
place a Virtual SSAS into maintenance modemaintain
rehost a Virtual SSAS to another servermove
Return a Virtual SSAS to operation modeoperate
show status for a Virtual SQL Serverstatus
modify an existing Virtual SQL Serverupdate
add—Add a new Virtual SSAS
mx vssas add [--policy autofailback|nofailback] [--application
<application>] [––force yes|no] <ip> <name> << network_interface> ...>
The options are:
--policy autofailback|nofailback
The failback action that the Virtual SSAS will take following failover to a backup
node. autofailback will fail back when a higher-ranked node provides equal or
greater services than the backup node; nofailback fails back only if a higher-
ranked node provides greater services than the backup node. autofailback is
the default.
--application <application>
The application tag associated with this Virtual SSAS. If you do not specify an
application, the IP address for the Virtual SSAS will be used.
[--force yes|no]
HP PolyServe Software 4.1 command reference guide 135