4.1.0 HP PolyServe Software command reference guide (T5392-96071, October 2010)

[--startTimeout <seconds>]
The amount of time to wait for the Start script to complete.
[--stopScript <script>]
A script that runs on all other servers configured for the service monitor to ensure
that the service is not active on those servers.
[--stopTimeout <seconds>]
The amount of time to wait for the Stop script to complete.
[--eventSeverity consider|ignore]
Whether Matrix Server takes service monitor events (such as a failure or timeout
of a Start or Stop script) into consideration when it makes failover decisions. The
default is consider.
[--priority <priority>]
The priority of the service monitor in relation to other service monitors. priority
is a natural number; 0 is the highest priority. Matrix Server uses the priority when
failing over the virtual host associated with the monitor. If multiple failures have
occurred, all of the services associated with the virtual host may not be available
on one server. In this case, Matrix Server will fail over to a network interface on
a server running the highest priority service. The default priority is 0.
clear—Clear a monitor event
mx service clear <vhost:port> <server> ...
<servicename> is either the <vhost:port> for the service monitor or the name
of a custom monitor.
delete—Delete a service monitor
mx service delete <vhost:port>
disable—Disable a service monitor
mx service disable <vhost:port> <server> ...
dump—Dump the service monitor configuration to stdout
mx service dump
enable—Enable a service monitor
mx service enable <vhost:port> <server> ...
status—Display the status of a service monitor
mx service status [arguments] [<vhost:port>]
mx commands118