4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

-U Display output in the format used by the PolyServe Management Console. This
option is used internally by Matrix Server and does not produce human-readable
output.
-q Suppress output of all log messages.
Following are some examples of these options.
Show partition information
The -a option lists the partitions on each disk. When combined with -u, it displays
partition information for unimported disks.
# sandiskinfo -a
Show local device information
The -l option displays the local device name for each disk, as well as the default
disk information. When combined with -u, it displays local device names for
unimported disks.
# sandiskinfo -al
Show filesystem information
The -f option displays existing PSFS filesystems on imported disks.
Show available volumes
The -v option lists available volumes on imported disks. These volumes are not
currently being used for a PSFS filesystem or a membership partition.
# sandiskinfo -v
Options for dynamic volumes
The following sandiskinfo options apply only to dynamic volumes.
Show available subdevices
The --subdevices option lists subdevices that are available for use in constructing
a dynamic volume.
Configure the SAN80