4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

To deport a disk from the command line, use the following command:
mx disk deport <uuid> ...
To determine the uuid for the disk, run the mx disk status --imported
command.
You can also use the Disk Info window to deport a disk.
Display local disk information
The Disk Info window displays disk information from the viewpoint of the local server.
It can be used to match the disk names appearing in the Microsoft Disk Management
utility (the Local Name) with the disk names that Matrix Server uses (the PSD Name).
You can also use this window to import or deport SAN disks.
To see the disk information, select the server on the Server tab on the PolyServe
Management Console, right-click, and then select View Local Disk Info. Resize the
columns on the Disk Info window to view all of the information.
Configure the SAN76