4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

Enable or disable a network interface for virtual
hosting
By default, all network interfaces are enabled for virtual hosting. To enable or disable
a network interface for virtual hosting, select that interface on the Servers window,
right-click, and then select either Enable Hosting or Disable Hosting.
From the command line, use this command to disable virtual hosting:
mx netif disable <interface_ip> ...
Use the following command to enable virtual hosting:
mx netif enable <interface_ip> ...
Add or modify a network interface
When you add a server to the cluster, its network interfaces are automatically
configured into the cluster. Occasionally, you may want to preconfigure a network
interface. For example, you can add a network interface that either does not currently
exist on a server, or that is on a server that is down. You might also want to modify
an existing interface.
To add a network interface, select the server for that interface on the Servers window,
right-click, and select Add Network Interface.
To modify an existing network interface, select that interface, right-click, and select
Properties. The network interface must be down; you cannot modify an “up” network
interface.
Server: The name or IP address of the server that will include the new network
interface.
HP PolyServe Matrix Server 4.1.0 administration guide 69