4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

Use the following command at the Command Prompt to see the software installed
on specific servers:
mx server listsoftware <server>
Start or stop Matrix Server
By default, Matrix Server (the matrixserver service) starts automatically when the
system is booted. This feature is controlled by the Startup dialog. If you do not want
Matrix Server to start when the system is booted, use one of these methods to disable
the service:
• Open the Startup dialog and change the service from Automatic to Disabled.
• Run the sc config matrixserver start= disabled command.
Start Matrix Server
To start Matrix Server on a particular server, use one of these methods:
HP PolyServe Matrix Server 4.1.0 administration guide 47