4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

Delete a device monitor
From the Management Console, select the device monitor to be deleted, right-click,
and select Delete.
To delete a device monitor from the command line, use this command:
mx device delete <devicename> ...
Disable a device monitor
From the Management Console, select the device monitor to be disabled, right-click,
and select Disable.
To disable a device monitor from the command line, use this command:
mx device disable <devicename> <server> ...
Enable a device monitor
From the Management Console, select the device monitor to be enabled, right-click,
and select Enable.
To enable a device monitor from the command line, use this command:
mx device enable <devicename> <server> ...
Clear device monitor error condition
To clear an error from a device monitor, select that monitor, right-click, and select
Clear Last Event.
To clear the device error from the command line, use this command:
mx device clear <devicename> <server> ...
Configure device monitors232