4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

Enable a previously disabled service monitor
From the Management Console, select the service monitor to be enabled and then,
on the node where the monitor should be enabled, right-click and select Enable.
To enable a service monitor from the command line, use this command:
mx service enable <vhost:port> <server> ...
Clear service monitor errors
From the Management Console, select the service monitor where the error occurred,
and then, on the node where the error occurred, right-click, and select Clear Last
Error. To clear a monitor error from the command line, use this command:
mx service clear <vhost:port> <server> ...
Configure service monitors216