4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

To define a new SNMP trap forwarding target, click Add New Target.
Target. Enter either the hostname or the IP address of the SNMP trap forwarding
target. The trap-forwarding destination port is the IANA registered port for snmptrap
(162/udp).
Community. Enter the community string that is used to access the target. The default
is public.
Disable the SNMP trap forwarding service. This checkbox can be used to enable or
disable the service as necessary.
After configuring the new target, click Send Test Trap to test access to the target.
HP PolyServe Matrix Server 4.1.0 administration guide 171