4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

NOTE:
The enable/disable features provided with Windows utilities cannot be used to
enable/disable quotas, as those features do not work with PSFS filesystems. These
utilities will report messages such as “One or more settings were not changed.”
Enable or disable quotas on the Management Console
To enable or disable quotas on an existing filesystem, locate the filesystem on the
Management Console, right-click, and select Properties. Then go to the Quotas tab
on the Properties dialog.
Check or uncheck Enable quotas as appropriate. If you are enabling quotas, you
can set the default hard and soft quotas for users on that filesystem. To do this, click
Limit and then specify the appropriate size in either kilobytes, megabytes, gigabytes,
or terabytes. The default is rounded down to the nearest filesystem block. (If you do
not want a default limit, click Unlimited.) The default quotas apply to all users who
do not have individual quotas.
Manage disk quotas136