4.1.0 HP PolyServe Matrix Server administration guide (T5392-96073, October 2010)

(G), or terabytes (T). If a modifier is not specified, the size will be calculated in
bytes. (The default is rounded down to the nearest filesystem block.)
[--enforceHardLimit <enable | disable>]
Whether the hard limit should be enforced (file operations that will result in ex-
ceeding the limit are denied). The default is disable.
[--logHardLimitViolations <enable | disable>]
Whether file operations that result in exceeding a user’s hard limit should be
logged in the system event log. The default is disable.
[--logSoftLimitViolations <enable | disable>]
Whether file operations that result in exceeding a user’s soft limit should be
logged in the system event log. The default is disable.
[--defaultQuotaType <staticdq | dynamicdq>]
With staticdq, the default, quota limits for new users are copied from the
default quota values set for the filesystem. With dynamicdq, the quota limits
are linked from the default quota values. If the default values are changed, the
user’s quota limits are also changed.
[--sparseFileAccounting <real | virtual>]
How quota accounting for sparse files is managed. real reflects the actual al-
location of filesystem space for the files. virtual reflects the virtual size of the
files. The default is real.
Drive letters and mount paths
To provide access to a PSFS filesystem, you will need to associate it with a drive
letter or a mount path.
Assign drive letters or paths
To assign a drive letter or mount path, select the filesystem on the Filesystems tab on
the PolyServe Management Console, right-click, and select Assign Path. The
assignment is made on all servers in the matrix.
Configure PSFS filesystems118