4.0.0 HP PolyServe Software for Windows File Serving administration guide (T5392-96047, March 2010)

Add a Virtual File Share
When you add a Virtual File Share to a Virtual CIFS Server, be sure to use the
PolyServe Management Console instead of a Windows application. (If Windows
utilities are used to create the Virtual File Shares, they will not fail over.)
HP PolyServe Software also creates a service monitor that periodically checks whether
the Virtual File Share can be accessed externally. A failure detected by the monitor’s
probe operation can cause the ClusterPulse process to fail over the Virtual CIFS Server
to a backup node. You can use the Advanced options on the Add Virtual File Share
window to customize the behavior of the service monitor. To add a Virtual File Share
to a Virtual CIFS Server, first select the Virtual CIFS Server on the PolyServe
Management Console. Then right-click and select Add Virtual File Share.
Virtual CIFS Server: This field contains the IP address of the Virtual CIFS Server that
you selected.
Share Name: Type a name for the Virtual File Share.
Configure Virtual CIFS Servers24