4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

For IBM Blade Center only, the blade slot.
--mixedvendor yes|no
Whether the vendor and type settings apply to all servers.
[--rpassword <password>]
The password for the Remote Management Controller.
--ruser <user name>
The Remote Management Controller user name.
[--sharedlogin yes|no]
Whether the login account is shared by all servers.
--type reset|shutdown
When a server needs to be restricted from the SAN, Matrix Server can either
power-cycle the server or shut it down. Select the method that you want to
use (either reset or shutdown).
mx config snapshot add --method <type> [--options <method op-
tions>]
Configure a snapshot method. The options are:
--method <type>
The supported types are hpeva and engenio.
[--options <method options>]
For hpeva, specify the following:
--hostname <hostname>
The hostname for the management appliance.
--username <username>
The user name required to access the management appliance.
--passwd <password>
The password required to access the management appliance.
For engenio, specify the following:
--controllerA <hostname or IP address>
The hostname or IP address for controllerA.
--controllerB <hostname or IP address>
The hostname or IP address for controllerB.
--passwd <password>
The password for the storage array controller.
The mx config snapshot showtype command also lists the options available
for your snapshot method.
HP PolyServe Matrix Server installation guide 51