4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

Engenio storage array. You will be asked for the hostnames or IP addresses and the
password for your storage array controllers.
Apply the configuration. When you have completed the Storage Settings tab, click
Apply (at the bottom of the Matrix Configuration window) to save the configuration
that you have created.
The configuration is then installed on the server that you are using to connect to the
Management Console. You will then be asked whether you want to start the matrix
on that server. If you configured Web management-based fencing, answer No.
Otherwise, answer Yes.
Install PolyServe Matrix Server36