4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

NOTE:
Array-based hardware snapshots are supported on HP EVA, HP MSA2000, and
Engenio storage arrays. The appropriate HP or Engenio software must be installed
as described under step 15. Install hardware snapshot software (optional), page 21.
To configure the snapshot method, click Add, select the appropriate method, and
then supply any requested configuration information.
HP-EVA storage array. You will be asked for the hostname and authentication
information for the management appliance.
HP-MSA2000 storage array. You will be asked for the hostnames or IP addresses of
the storage array controllers and also the username and password used to access
the controllers.
HP PolyServe Matrix Server installation guide 35