4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

All of the available partitions on that disk or LUN then appear in the bottom of the
window. Select one of these partitions and click Add. (The minimum size for a
membership partition is 1 GB.) Repeat this procedure to select two more membership
partitions. We recommend that the partitions be on different disks.
When selecting partitions for use as membership partitions, be sure that they do not
contain any needed data. When the membership partitions are created, any existing
data will be erased.
NOTE:
If you selected a subdevice that is associated with an unimported volume, you will
see a message reporting that the subdevice contains a volume signature. The message
asks whether you want to destroy the affected unimported dynamic volume and
reuse this subdevice in the new volume you are creating. Be sure that you do not
need the unimported dynamic volume before doing this. If the unimported volume
associated with the subdevice is in a “duplicate” state, the attempt to destroy the
volume will fail. See the HP PolyServe Matrix Server administration guide for more
information.
Snapshot configuration. Matrix Server supports array-based snapshots. If you want
to use this capability, you will need to configure the snapshot method.
Install PolyServe Matrix Server34