4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

• Vendor and type selections apply to all servers. This option is enabled by default.
Remove the checkmark if your Remote Management Controllers are from different
vendors or if, in the case of IBM Remote Management Controllers, some are as-
sociated with IBM BladeCenter servers and others are not.
• Login shared by all servers. Check this option if all servers in the matrix will be
sharing the login account that you specified on the Remote Management Controller
tab. If the login is not shared, you will be asked for the appropriate logins when
the other servers are added to the matrix.
Fencing Action. When a server needs to be restricted from the SAN, Matrix Server
can either power-cycle the server or shut it down. Select the method that you want
to use.
If you have Fibre Channel-connected storage and want to configure your Fibre
Channel switches into the matrix, go to the Switch Information tab. (This step is
optional; however, if the switches are configured the PolyServe Management Console
can display the switch ports used by the SAN.)
HP PolyServe Matrix Server installation guide 31