4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

Remote Management Controller Vendor. Select the vendor for your Remote
Management Controller. For an IBM BladeCenter, also specify the Blade slot.
Remote Management Controller ID. Specify how Matrix Server should identify the
Remote Management Controller associated with each server. Use one of the following
methods.
• Enter the hostname or IP address for the Remote Management Controller associated
with this server. You will need to use this method if your Remote Management
Controllers are from different vendors. This method must also be used for IBM
BladeCenter servers.
• Select Cluster-wide Pattern and then specify the common naming scheme that
you are using for the Remote Management Controllers (either a hostname suffix
or an IP address delta, as described below).
Hostname Suffix. Specify the common suffix to append to each server name to
determine the associated Remote Management Controller name. For example, if
HP PolyServe Matrix Server installation guide 29