4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

SNMP Community String. The default SNMP community string for Matrix Server is
private. If you want to use a custom community string, enter the appropriate value
here. The SNMP community string must be set to the same value on Matrix Server
and on the SAN switches configured above.
When you have completed the information, go to the Storage Settings tab, page 32.
Web management-based fencing
When you select either iSCSI storage or FibreChannel storage with Web
management-based fencing, the SAN & Fencing tab will refresh and ask you for
configuration information. Enter the appropriate information for the Remote
Management Controller associated with the server that you used to connect to the
Management Console.
NOTE:
Later in this procedure the complete matrix configuration will be exported to the
other servers that will be in the matrix. During the export, Matrix Server will, where
possible, use the information that you specified on the SAN & Fencing tab to
configure Web management-based fencing on the other servers. If a particular entry
on the SAN & Fencing tab did not apply to all servers, Matrix Server will ask for
that information for each of the other servers.
The Remote Management Controller tab asks for information about the controllers
associated with your servers.
Install PolyServe Matrix Server28