4.0.0 HP Polyserve Matrix Server Installation Guide (T5392-96046, March 2010)

Select your storage type and, for FibreChannel, specify the fencing method that you
want to use.
• Fibre-Channel switch-based fencing, below.
• Web management-based fencing
Fibre Channel switch-based fencing
Complete the following on the SAN & Fencing tab:
SAN Switches. Specify the hostnames or IP addresses of the FibreChannel switches
that are directly connected to the nodes in the matrix. Click Add and then specify
the hostname or IP address of the first FC switch. Repeat this procedure to specify
the remaining FC switches, including cascading switches. If you are using an MPIO
configuration, be sure to configure all of the switches.
HP PolyServe Matrix Server installation guide 27