4.0.0 HP Polyserve Matrix Server Event Notification Guide (T5392-96053, March 2010)

Message and Corrective ActionID
This matrix takes control of SAN failure resolved.
Action. None. Alert 17007 is resolved.
17008
This matrix unable to take control of SAN, because a majority of the membership
partitions cannot be written or are corrupt, possibly due to a SAN hardware failure
or misconfiguration and/or because servers have been excluded from the SAN.
As a result, some or all filesystem operations may be paused throughout the matrix.
In addition, filesystem mounts and unmounts and disk imports and deports cannot
be performed.
Action. Ensure that all servers can access the membership partitions and have write
access to them. If a membership partition is corrupt, another alert will specify its
location. See “Membership partitions” in the Matrix Server administration guide
for corrective actions.
17009
This matrix takes control of SAN failure resolved.
Action. None. Alert 17009 is resolved.
17010
Singleton matrix unable to take control of SAN. Possibly this server has not been
added to the matrix or has been deleted from the matrix, or possibly a network
failure has partitioned this server from the rest of the matrix. As a result, some or
all filesystem operations may be paused throughout the matrix. In addition,
filesystem mounts and unmounts and disk imports and deports cannot be performed.
Action. Check the matrix configuration and add the server if it is not currently a
member. Also check the network connections and configuration for the server to
ensure that it can communicate with the rest of the matrix.
17011
Singleton matrix takes control of SAN failure resolved.
Action. None. Alert 17011 is resolved.
17012
This matrix unable to take control of SAN. As a result, some or all filesystem
operations may be paused throughout the matrix. In addition, filesystem mounts
and unmounts and disk imports and deports cannot be performed.
Action. Verify that the servers can access the membership partitions and have write
access to them. If a FibreChannel switch is configured in the matrix, verify that the
servers can communicate with it. If no problems are found, contact HP Support.
17013
This matrix takes control of SAN failure resolved.
Action. None. Alert 17013 is resolved.
17014
PolyServe Matrix Server event notification guide 37