4.0.0 HP Polyserve Matrix Server Event Notification Guide (T5392-96053, March 2010)

Message and Corrective ActionID
Singleton matrix takes control of SAN failure resolved.
Action. None. Alert 17001 is resolved.
17002
This matrix unable to take control of SAN, because another matrix that includes
NN.NN.NN.NN currently controls the SAN. Possibly a networking failure or
misconfiguration has partitioned these servers from the servers that control the
SAN, or possibly this matrix has been misconfigured to share membership partitions
with another matrix.
Action. Check the matrix configuration and add the server if it is not currently a
member. If your site has more than one matrix, use mprepair to make sure that
this server is using the correct set of membership partitions.
17003
This matrix takes control of SAN failure resolved.
Action. None. Alert 17003 is resolved.
17004
This matrix is unable to take control of SAN, because the servers are unable to
perform fencing operations, possibly due to a networking or fencing hardware
failure or misconfiguration. As a result, some or all filesystem operations may be
paused throughout the matrix. In addition, filesystem mounts and unmounts and
disk imports and deports can not be performed.
Action. Matrix Server is unable to exclude servers that have become unresponsive,
or to verify the fencing of servers that were previously fenced and have not yet
been rebooted. Possibly the fencing device is not responding to the fencing request
or the Ethernet connection to the FibreChannel switch has failed. Also check for
other networking or SAN hardware problems. The servers should be rebooted as
soon as possible.
17005
This matrix takes control of SAN failure resolved.
Action. None. Alert 17005 is resolved.
17006
This matrix unable to take control of SAN, because the servers are unable to write
to a majority of the membership partitions, possibly due to a SAN hardware failure
or misconfiguration and/or because some servers have been excluded from the
SAN. As a result, some or all filesystem operations may be paused throughout the
matrix. In addition, filesystem mounts and unmounts and disk imports and deports
cannot be performed.
Action. Check the matrix configuration and add the server if it is not currently a
member. Also ensure that the server can access the membership partitions and
has write access to them, and check for any SAN hardware problems.
17007
Event messages36