4.0.0 HP Polyserve Matrix Server Event Notification Guide (T5392-96053, March 2010)

Message and Corrective ActionID
Probe failed: <IP address> Socket receive error: <error>
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host associated with the monitor. If the virtual host was active
on the affected server, it may have failed over to another server. (Whether failover
occurs is dependent on the configuration of the monitor and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host for problems.
4612
Socket receive error resolved.
Action. None. Alert 4612 is resolved.
4613
Probe failed: <IP address> Socket send error: <error>
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host associated with the monitor. If the virtual host was active
on the affected server, it may have failed over to another server. (Whether failover
occurs is dependent on the configuration of the monitor and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host for problems.
4614
Socket send error resolved.
Action. None. Alert 4614 is resolved.
4615
Probe failed: <IP address> Socket peer has shut down.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host associated with the monitor. If the virtual host was active
on the affected server, it may have failed over to another server. (Whether failover
occurs is dependent on the configuration of the monitor and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host for problems.
4616
Socket peer error resolved.
Action. None. Alert 4616 is resolved.
4617
PolyServe Matrix Server event notification guide 27