4.0.0 HP Polyserve Matrix Server Event Notification Guide (T5392-96053, March 2010)

Message and Corrective ActionID
Probe failed: <monitor> Partition could not be accessed.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host(s) associated with the monitor. If the virtual host(s) were
active on the affected server, they may have failed over to another server. (Whether
failover occurs is dependent on the configuration of the monitor and the virtual
host(s).)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host(s) for problems.
4542
Partition access resolved.
Action. None. Alert 4542 is resolved.
4543
Probe failed: <monitor> Monitor timeout failed.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host(s) associated with the monitor. If the virtual host(s) were
active on the affected server, they may have failed over to another server. (Whether
failover occurs is dependent on the configuration of the monitor and the virtual
host(s).)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host(s) for problems.
4544
Monitor timeout resolved.
Action. None. Alert 4544 is resolved.
4545
Probe failed: <IP address> Invalid parameters.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host associated with the monitor. If the virtual host was active
on the affected server, it may have failed over to another server. (Whether failover
occurs is dependent on the configuration of the monitor and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host for problems.
4546
Invalid parameters resolved.
Action. None. Alert 4546 is resolved.
4547
Event messages16