4.0.0 HP Polyserve Matrix Server Event Notification Guide (T5392-96053, March 2010)

Message and Corrective ActionID
Probe failed: <monitor> Monitor type '<monitor>' will terminate to load
newer function.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host(s) associated with the monitor. If the virtual host(s) were
active on the affected server, they may have failed over to another server. (Whether
failover occurs is dependent on the configuration of the monitor and the virtual
host(s).)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host(s) for problems.
4530
Device monitor type reloaded.
Action. None. Alert 4530 is resolved.
4531
Probe failed: <IP address> Monitor probe function is NULL.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host associated with the monitor. If the virtual host was active
on the affected server, it may have failed over to another server. (Whether failover
occurs is dependent on the configuration of the monitor and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host for problems.
4532
Probe function resolved.
Action. None. Alert 4532 is resolved.
4533
Probe failed: <monitor> Monitor probe function is NULL.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host(s) associated with the monitor. If the virtual host(s) were
active on the affected server, they may have failed over to another server. (Whether
failover occurs is dependent on the configuration of the monitor and the virtual
host(s).)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host(s) for problems.
4534
Probe function resolved.
Action. None. Alert 4534 is resolved.
4535
Event messages14