4.0.0 HP Polyserve Matrix Server Event Notification Guide (T5392-96053, March 2010)

Message and Corrective ActionID
Communication to server <server> is down.
Action. A server configured in the matrix is not communicating with the rest of the
matrix. If Matrix Server is stopped on the server, restart the product. Otherwise,
check for network issues causing the problem or remove the server from the matrix.
109
Communication to server <server> restored.
Action. None. Alert 109 is resolved.
110
Probe failed: <IP address> configuration error, script '<script>'
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host associated with the monitor. If the virtual host was active
on the affected server, it may have failed over to another server. (Whether failover
occurs is dependent on the configuration of the monitor and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host for problems.
4504
Service monitor script configuration resolved.
Action. None. Alert 4504 is resolved.
4505
Probe failed: <monitor> configuration error, script <script>
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host(s) associated with the monitor. If the virtual host(s) were
active on the affected server, they may have failed over to another server. (Whether
failover occurs is dependent on the configuration of the monitor and the virtual
host(s).)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host(s) for problems.
4506
Device monitor script configuration resolved.
Action. None. Alert 4506 is resolved.
4507
Probe failed: <IP address> monitor process creation failed.
The monitor probe failed on the specified server. The server may no longer be
suitable for the virtual host associated with the monitor. If the virtual host was active
on the affected server, it may have failed over to another server. (Whether failover
occurs is dependent on the configuration of the monitor and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and the
network interface associated with the virtual host for problems.
4508
Event messages10