4.0.0 HP Polyserve Matrix Server Command Reference Guide (T5392-96048, March 2010)

partitions, but the physical size can vary and will always be the same or larger than
the “used” size.
list_avail_disks—List disks that can be used for membership partitions
mx config mp list_avail_disks [--noHeaders] [--csv] [--showborder]
The options are:
[--noHeaders]
Do not display column headers in the output.
[--csv]
Display the output in comma-separated value format.
[--showborder]
Display borders in the output.
list_avail_partitions—List partitions that can be used for membership partitions
mx config mp list_avail_partitions [--noHeaders] [--csv] [--showborder]
<disk uuid>
<disk uuid> is the disk that will be checked for available partitions. The options
are:
[--noHeaders]
Do not display column headers in the output.
[--csv]
Display the output in comma-separated value format.
[--showborder]
Display borders in the output.
repair—Repair a membership partition
mx config mp repair [--reuse] <uuid>
This command can be used to resilver a corrupt membership partition. <uuid> is
the disk UID of the membership partition to be repaired. The --reuse option allows
disks that contain existing volume information to be reused. (The existing data is
destroyed.) The --reuse option is available only when the cluster is offline.
set—Add or replace membership partitions
mx config mp set [--recreate] [--force] [--reuse] <uuid1/partno>
[<uuid2/partno> <uuid3/partno>]
A cluster can use either one or three membership partitions. <uuid1/partno> is
the uuid and partition number of the first membership partition; <uuid2/partno>
PolyServe Software command reference guide 77