4.0.0 HP Polyserve Matrix Server Command Reference Guide (T5392-96048, March 2010)

Disable quotas on the specified filesystem and free the associated blocks.
--set-dq <size>[T|G|M|K]
Set the default hard quota for users on the specified filesystem. The optional
modifiers specify that the size is in terabytes (T), gigabytes (G), megabytes (M),
or kilobytes (K). If a modifier is not specified, the size will be calculated in bytes.
(The default is rounded down to the nearest filesystem block.)
--set-sdq <size>[T|G|M|K]
Set the default soft quota on the specified filesystem. The modifiers are the same
as the set-dq option. (The default is rounded down to the nearest filesystem
block.)
--rebuild-quotas
Recalculate quota allocations.
The following options can be used with the enable-quotas option:
--staticdq
Quota limits for new users are copied from the default quota values set for the
filesystem.
--dynamicdq
Quota limits for new users are linked from the default quota values set for the
filesystem. If the default quota values are changed, the users quota limits will
also change.
--enforce-hardlimit
File operations that will result in exceeding a users hard limit are denied.
--no-enforce-hardlimit
File operations that will result in exceeding a users hard limit are allowed.
--log-hardlimit
File operations that result in exceeding a users hard limit are logged in the system
event log.
--no-log-hardlimit
File operations that result in exceeding a users hard limit are not logged.
--log-softlimit
File operations that result in exceeding a users soft limit are logged in the system
event log.
--no-log-softlimit
File operations that result in exceeding a users soft limit are not logged.
--sparse-fullcost
Quota accounting for sparse files reflects the virtual size of the files.
PolyServe Software command reference guide 43