4.0.0 HP Polyserve Matrix Server Command Reference Guide (T5392-96048, March 2010)

update—Modify an existing Virtual MSDTC
mx vmsdtc update [--policy autofailback|nofailback] [--application
<application>] [––force yes|no] <ip> <name> << network_interface> ...>
The options are the same as vmsdtc add.
mx vmsdtc_service – Virtual MSDTC service
commands
Use the following commands to configure the Virtual MSDTC service.
DescriptionCommand
Add a new MSDTC serviceadd
Remove a MSDTC servicedelete
Disable a MSDTC servicedisable
Dump the MSDTC service configurationdump
Enable a MSDTC serviceenable
Show the status of a MSDTC servicestatus
Modify an existing MSDTC serviceupdate
add—Add a MSDTC service
mx vsdtc_service add ––vpath <path> [arguments] \\<vmsdtc>\<msdtc> ...
The arguments are:
--vpath <path>
The full path that will be used for the data files and directories for this virtual
MSDTC Server instance. This location will store the MSDTC Data Root that was
created when the SQL Server instance was installed.
[--timeout <seconds>]
The maximum amount of time to wait for a probe to complete. The default is 15
seconds.
[--frequency <seconds>]
The interval of time at which the monitor runs the probe. The default is 12 seconds.
PolyServe Software command reference guide 131